Bostik Hobby Craft PVA Glue Non Toxic Clear Drying 120mL

Key features

• Dries clear for a neat, invisible finish
• Non toxic and low odour
• Water based for easy clean up before curing
• Suitable for brush or nozzle application
• Paintable when dry
• Strong bond on porous surfaces

Ideal for

• Paper, cardboard, photos, and scrapbooking
• Craft foam, felt, and fabric edge bonding
• Balsa wood and other light timbers
• School and hobby projects

Directions

1. Ensure surfaces are clean, dry, and free of dust or oil.
2. Apply a thin, even coat to one surface. For very porous materials, coat both surfaces.
3. Join pieces while the glue is wet and press firmly. Clamp or weight if needed.
4. Wipe away excess with a damp cloth.
5. Allow to set. Light handling is typically possible after 30 to 60 minutes. Full strength develops after 24 hours.

Clean up

Clean tools and fresh spills with a damp cloth. Once cured, scraping or sanding may be required.

Handy tips

• For stronger joints on timber, lightly sand and dry fit pieces before gluing.
• Avoid excessive glue, which can lead to slow drying and warping on thin paper.
• Not suitable for continuous water immersion or load bearing joins.

Storage

Replace cap after use. Store upright in a cool, dry place away from frost and direct heat.

Safety

Non toxic formula. If irritation occurs, discontinue use.

Technical details

Base	PVA emulsion
Appearance	White, dries clear
Viscosity	Medium, smooth flow
Open time	Up to 10 minutes depending on surface and coat weight
Set time	Approx. 30 to 60 minutes
Full cure	24 hours
Water resistance	Not recommended for prolonged moisture exposure
Paintable	Yes, once fully dry