🚚 Free Worldwide Shipping on All Orders!Shop Now
Product image 1
HomeStore

Crommelin Hybrid MS Polyurethane Flexible Sealant 300ml

Crommelin Hybrid MS Polyurethane Flexible Sealant 300ml

Crommelin Hybrid MS Polyurethane Flexible Sealant 300ml

Take on interior and exterior sealing with a professional grade hybrid MS polyurethane. This single component sealant delivers a flexible, durable seal on common building substrates and is suitable for a wide range of construction and maintenance tasks.

Key benefits

  • Very low VOC and isocyanate free
  • UV resistant for long term outdoor performance
  • High flexibility to accommodate joint movement
  • Excellent adhesion on properly prepared porous and non porous surfaces
  • Easy to gun, tool and clean up

Typical applications

  • Construction and expansion joints
  • Perimeter sealing around windows and doors
  • Roofing and cladding laps, flashings and penetrations
  • General gap sealing in wet and dry areas

Suitable substrates

  • Concrete, masonry, brick and render
  • Timber and fibre cement
  • Metals and coated metals
  • Many plastics* and glass

*Always pre test for compatibility and adhesion.

Surface preparation

  • Surfaces must be clean, dry, sound and free of dust, oil, release agents and loose material.
  • Remove old sealant and contaminants. Abrade dense or glossy surfaces if required.
  • Use suitable primer if specified for difficult or highly porous substrates.
  • Mask edges for neat joints and install closed cell backing rod where needed to control joint depth.

Application

  1. Cut nozzle to required bead size and load cartridge into a quality caulking gun.
  2. Gun a continuous bead into the joint ensuring full contact with sides and backing.
  3. Tool off with a moistened spatula for a smooth finish before skin forms.
  4. Protect from water and disturbance during initial cure.

Clean up

  • Clean tools and fresh spills promptly.
  • Once cured, remove by mechanical means.

Good to know

  • Low odour formulation suitable for indoor use with ventilation.
  • Paintable with many water based coatings once skinned and cured. Always test first.
  • Store upright in a cool, dry place. Keep out of direct sunlight.

Safety

  • Wear suitable gloves and eye protection.
  • Avoid contact with skin and eyes. If contact occurs, rinse with clean water.
  • Refer to the product Safety Data Sheet for full precautions.

What’s in the box

  • 1 x 300ml cartridge
  • 1 x application nozzle
$8.57
Crommelin Hybrid MS Polyurethane Flexible Sealant 300ml
$8.57

Product Information

Shipping & Returns

Description

Crommelin Hybrid MS Polyurethane Flexible Sealant 300ml

Take on interior and exterior sealing with a professional grade hybrid MS polyurethane. This single component sealant delivers a flexible, durable seal on common building substrates and is suitable for a wide range of construction and maintenance tasks.

Key benefits

  • Very low VOC and isocyanate free
  • UV resistant for long term outdoor performance
  • High flexibility to accommodate joint movement
  • Excellent adhesion on properly prepared porous and non porous surfaces
  • Easy to gun, tool and clean up

Typical applications

  • Construction and expansion joints
  • Perimeter sealing around windows and doors
  • Roofing and cladding laps, flashings and penetrations
  • General gap sealing in wet and dry areas

Suitable substrates

  • Concrete, masonry, brick and render
  • Timber and fibre cement
  • Metals and coated metals
  • Many plastics* and glass

*Always pre test for compatibility and adhesion.

Surface preparation

  • Surfaces must be clean, dry, sound and free of dust, oil, release agents and loose material.
  • Remove old sealant and contaminants. Abrade dense or glossy surfaces if required.
  • Use suitable primer if specified for difficult or highly porous substrates.
  • Mask edges for neat joints and install closed cell backing rod where needed to control joint depth.

Application

  1. Cut nozzle to required bead size and load cartridge into a quality caulking gun.
  2. Gun a continuous bead into the joint ensuring full contact with sides and backing.
  3. Tool off with a moistened spatula for a smooth finish before skin forms.
  4. Protect from water and disturbance during initial cure.

Clean up

  • Clean tools and fresh spills promptly.
  • Once cured, remove by mechanical means.

Good to know

  • Low odour formulation suitable for indoor use with ventilation.
  • Paintable with many water based coatings once skinned and cured. Always test first.
  • Store upright in a cool, dry place. Keep out of direct sunlight.

Safety

  • Wear suitable gloves and eye protection.
  • Avoid contact with skin and eyes. If contact occurs, rinse with clean water.
  • Refer to the product Safety Data Sheet for full precautions.

What’s in the box

  • 1 x 300ml cartridge
  • 1 x application nozzle
Crommelin Hybrid MS Polyurethane Flexible Sealant 300ml | Glues