Dunlop Tile-All Plus Premixed Tile Adhesive 310ml
Dunlop Tile-All Plus Premixed Tile Adhesive 310ml
Tile-All Plus is a single component, silane modified polymer adhesive and neutral curing sealant. It offers high initial tack, strong bonding and excellent flexibility. Use it for fast, reliable repairs in showers, kitchens and bathrooms, for replacing tiles, fitting accessories and finishing joints. It can even be used for minor repairs underwater.
Why you will like it
- High initial grab for confident positioning
- Flexible bond that resists movement and vibration
- Neutral cure for a low odour application experience
- Works as both an adhesive and a sealant
- Paintable after drying with most common paints (test first)
Where to use it
- Showers, kitchens and bathrooms
- Replacing loose tiles and fitting trims or accessories
- Finishing expansion and connection joints
- Minor underwater fixes on suitable surfaces
Suitable materials
Glass, tiles, ceramics, timber, plastics, metals, concrete, wall panels, waterproofing membranes, aluminium, polystyrene foam, and glazed tiles. Always ensure surfaces are sound, clean and free from dust, oil, grease and coatings. Slightly damp substrates are acceptable.
How to use
- Remove the aluminium seal at the base of the cartridge. Pierce the inner membrane, fit the nozzle and trim to the required bead size.
- Apply in stripes to the substrate or the item being fixed.
- Press parts together firmly within 7 to 10 minutes at 20°C, before skinning begins.
- For spot fixing, keep glue points 25 to 30 cm apart and confirm the item weight is appropriate.
- Avoid application below 5°C or above 35°C.
Good to know
- Open time varies with temperature, humidity and substrate. Higher humidity shortens open time.
- If reusing, remove any skinned layer from the nozzle before the next application.
- Spills can be wiped away while wet with a clean cloth.
- Not recommended for chemical resistant applications.
Cleanup and storage
- Clean excess while wet with a cloth.
- Shelf life is up to 12 months in unopened packaging stored in a cool, dry place at around 23°C and 50 percent relative humidity.
Safety
- Use in a well ventilated area. Avoid skin and eye contact.
- If contact occurs, flush eyes with water for at least 15 minutes and seek medical advice. Wash skin with soap and water.
- If inhalation discomfort occurs, move to fresh air. If swallowed, drink water in small portions and seek medical advice. Keep out of reach of children.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dunlop Tile-All Plus Premixed Tile Adhesive 310ml
Tile-All Plus is a single component, silane modified polymer adhesive and neutral curing sealant. It offers high initial tack, strong bonding and excellent flexibility. Use it for fast, reliable repairs in showers, kitchens and bathrooms, for replacing tiles, fitting accessories and finishing joints. It can even be used for minor repairs underwater.
Why you will like it
- High initial grab for confident positioning
- Flexible bond that resists movement and vibration
- Neutral cure for a low odour application experience
- Works as both an adhesive and a sealant
- Paintable after drying with most common paints (test first)
Where to use it
- Showers, kitchens and bathrooms
- Replacing loose tiles and fitting trims or accessories
- Finishing expansion and connection joints
- Minor underwater fixes on suitable surfaces
Suitable materials
Glass, tiles, ceramics, timber, plastics, metals, concrete, wall panels, waterproofing membranes, aluminium, polystyrene foam, and glazed tiles. Always ensure surfaces are sound, clean and free from dust, oil, grease and coatings. Slightly damp substrates are acceptable.
How to use
- Remove the aluminium seal at the base of the cartridge. Pierce the inner membrane, fit the nozzle and trim to the required bead size.
- Apply in stripes to the substrate or the item being fixed.
- Press parts together firmly within 7 to 10 minutes at 20°C, before skinning begins.
- For spot fixing, keep glue points 25 to 30 cm apart and confirm the item weight is appropriate.
- Avoid application below 5°C or above 35°C.
Good to know
- Open time varies with temperature, humidity and substrate. Higher humidity shortens open time.
- If reusing, remove any skinned layer from the nozzle before the next application.
- Spills can be wiped away while wet with a clean cloth.
- Not recommended for chemical resistant applications.
Cleanup and storage
- Clean excess while wet with a cloth.
- Shelf life is up to 12 months in unopened packaging stored in a cool, dry place at around 23°C and 50 percent relative humidity.
Safety
- Use in a well ventilated area. Avoid skin and eye contact.
- If contact occurs, flush eyes with water for at least 15 minutes and seek medical advice. Wash skin with soap and water.
- If inhalation discomfort occurs, move to fresh air. If swallowed, drink water in small portions and seek medical advice. Keep out of reach of children.
