Loctite 277 Equivalent T77 STUDLOCK: High-Strength Threadlocker for Large Diameter Bolts, 25mm+ 50ml
Hold It Australia T77 STUDLOCK
High Strength for Bolts 25mm and Above - 50ml
Description: HOLDIT AUSTRALIA T77 Studlock large diameter high strength threadlocker is a red, general purpose adhesive for permanent threaded assemblies. It effectively locks fasteners 1 and larger in diameter, providing a seal against leakage and corrosion while resisting attacks from lubricants and industrial liquids and gases.
Applications
Ideal for eliminating double nutting/welding in critical assemblies. T77 allows for reduced casting thickness and prevents cracked castings from interference fit stresses. Suitable for larger diameter studs with coarse threads and can be used to reclaim worn stud holes. Primers are recommended for large gaps and poorly fitting parts.
Instructions for Use
- Clean all surfaces with a cleaning solvent and allow to dry.
- If the metal is inactive or the cure speed is slow, apply HOLDIT AUSTRALIA AA471 Activator or AA649 Accelerator.
- Shake the product thoroughly before application.
- Apply the adhesive to the fixing position of the fastener or onto the internal threads of a blind hole.
- Assemble components and tighten to the required torque level.
- Allow the adhesive to fully cure before applying load.
Active & Inactive Metal Table
- Active Metals (Fast Cure): Iron, Steel, Nickel, Aluminium
- Inactive Metals (Slow Cure): Stainless Steel, Titanium, Zinc, Anodized Aluminium, Galvanised Steel
- Passive Surfaces (Primer Necessary): Ceramics, Glass, Plastics, Painted Surfaces
Original: $18.57
-65%$18.57
$6.50Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Hold It Australia T77 STUDLOCK
High Strength for Bolts 25mm and Above - 50ml
Description: HOLDIT AUSTRALIA T77 Studlock large diameter high strength threadlocker is a red, general purpose adhesive for permanent threaded assemblies. It effectively locks fasteners 1 and larger in diameter, providing a seal against leakage and corrosion while resisting attacks from lubricants and industrial liquids and gases.
Applications
Ideal for eliminating double nutting/welding in critical assemblies. T77 allows for reduced casting thickness and prevents cracked castings from interference fit stresses. Suitable for larger diameter studs with coarse threads and can be used to reclaim worn stud holes. Primers are recommended for large gaps and poorly fitting parts.
Instructions for Use
- Clean all surfaces with a cleaning solvent and allow to dry.
- If the metal is inactive or the cure speed is slow, apply HOLDIT AUSTRALIA AA471 Activator or AA649 Accelerator.
- Shake the product thoroughly before application.
- Apply the adhesive to the fixing position of the fastener or onto the internal threads of a blind hole.
- Assemble components and tighten to the required torque level.
- Allow the adhesive to fully cure before applying load.
Active & Inactive Metal Table
- Active Metals (Fast Cure): Iron, Steel, Nickel, Aluminium
- Inactive Metals (Slow Cure): Stainless Steel, Titanium, Zinc, Anodized Aluminium, Galvanised Steel
- Passive Surfaces (Primer Necessary): Ceramics, Glass, Plastics, Painted Surfaces
