🚚 Free Worldwide Shipping on All Orders!Shop Now
Loctite MR 5412 Contact Neoprene Adhesive 147ml 30537
Neoprene solvent-based contact cement gel used for all types of weather-stripping, porous and non-porous surfaces and general purpose bonding.
LOCTITE® MR 5412 is a yellow, neoprene solvent-based contact cement gel used for all types of weather-stripping, porous and non-porous surfaces and general purpose bonding. Typical applications include bonding weather stripping, insulation, rubber and trim to wood and metal.
Suitable for all types of weather-stripping, porous and non-porous surfaces and general purpose bonding
Technical Information
% Solids 10
Agency Approvals / Specifications CFIA Listed
Colour Yellow
Fixture Time 15 min.
Key Characteristics Waterproof
Physical Form Liquid
Specific Gravity 0.88 g/l
Specific Gravity Temperature 25 °C
Substrates Metal, Wood
Directions for use:
1. Clean surfaces thoroughly. Use abrasives to remove any powdery mold release from new weatherstripping.
2. Apply a thin, even film to both surfaces.
3. Allow to dry tacky (3 to 4 minutes).
4. Bond the two surfaces together and apply enough pressure to produce uniform contact.
5. NOTE: The early strength of LOCTITE® MR 5412 is enough to hold most parts together. However, maximum strength is obtained after the adhesive is completely dry.
Aging of the bond and exposure to moderate heat increases strength.
$4.25
Original: $12.14
-65%Loctite MR 5412 Contact Neoprene Adhesive 147ml 30537—
$12.14
$4.25Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Neoprene solvent-based contact cement gel used for all types of weather-stripping, porous and non-porous surfaces and general purpose bonding.
LOCTITE® MR 5412 is a yellow, neoprene solvent-based contact cement gel used for all types of weather-stripping, porous and non-porous surfaces and general purpose bonding. Typical applications include bonding weather stripping, insulation, rubber and trim to wood and metal.
Suitable for all types of weather-stripping, porous and non-porous surfaces and general purpose bonding
Technical Information
% Solids 10
Agency Approvals / Specifications CFIA Listed
Colour Yellow
Fixture Time 15 min.
Key Characteristics Waterproof
Physical Form Liquid
Specific Gravity 0.88 g/l
Specific Gravity Temperature 25 °C
Substrates Metal, Wood
Directions for use:
1. Clean surfaces thoroughly. Use abrasives to remove any powdery mold release from new weatherstripping.
2. Apply a thin, even film to both surfaces.
3. Allow to dry tacky (3 to 4 minutes).
4. Bond the two surfaces together and apply enough pressure to produce uniform contact.
5. NOTE: The early strength of LOCTITE® MR 5412 is enough to hold most parts together. However, maximum strength is obtained after the adhesive is completely dry.
Aging of the bond and exposure to moderate heat increases strength.
