🚚 Free Worldwide Shipping on All Orders!Shop Now
Dunlop Vinyl Adhesive 4L
Fast, reliable bond for vinyl sheet and tiles
Dunlop Vinyl Adhesive is a water based, high strength adhesive that spreads easily and delivers dependable bonds for vinyl sheet and vinyl tile on most concrete and timber subfloors. Ideal for installers and serious DIYers who want clean application and solid performance.
Key features
- High initial grab for confident placement
- Easy to spread with smooth, low odour application
- Suitable for vinyl sheet and vinyl tile on concrete and timber subfloors
- Approximate coverage: 4 to 5 m² per litre, depending on surface and technique
- Tack time: 5 to 15 minutes at 23°C and 50% RH
- Sets in 24 hours for light foot traffic and finishing
Where to use
- Interior installations of vinyl sheet and vinyl tile
- Most prepared concrete and timber subfloors
Surface preparation
- Ensure surfaces are dry, smooth, clean and free of dust, oil, paint or contaminants that could limit adhesion.
- Prime highly porous concrete or timber with a suitable primer as directed by the manufacturer.
- Level or repair imperfections with a compatible floor leveller or floor repair compound before bonding.
Application
- Apply an even coat to the subfloor using a 1.6 × 1.6 × 1.6 mm V notched trowel.
- Allow adhesive to become tacky before laying vinyl. Typical tack time is about 10 minutes, longer in cool conditions and shorter in warm conditions. Do not allow a skin to form.
- Lay the vinyl into the adhesive.
- Roll firmly in both directions to ensure full transfer to the back of the vinyl.
Clean up
- Clean tools and spills immediately with warm soapy water.
- Remove dried adhesive with mineral turps.
Conditions and storage
- Apply between 8°C and 35°C with adequate ventilation.
- Shelf life: 12 months in unopened container stored at approximately 20°C.
Good to know
- Use a roller after placement to improve bond and minimise bubbles.
- Coverage varies with subfloor condition, porosity and trowel technique.
Warranty
Product is guaranteed for 10 years when installed in accordance with the manufacturer’s instructions.
$46.43
Dunlop Vinyl Adhesive 4L—
$46.43
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Fast, reliable bond for vinyl sheet and tiles
Dunlop Vinyl Adhesive is a water based, high strength adhesive that spreads easily and delivers dependable bonds for vinyl sheet and vinyl tile on most concrete and timber subfloors. Ideal for installers and serious DIYers who want clean application and solid performance.
Key features
- High initial grab for confident placement
- Easy to spread with smooth, low odour application
- Suitable for vinyl sheet and vinyl tile on concrete and timber subfloors
- Approximate coverage: 4 to 5 m² per litre, depending on surface and technique
- Tack time: 5 to 15 minutes at 23°C and 50% RH
- Sets in 24 hours for light foot traffic and finishing
Where to use
- Interior installations of vinyl sheet and vinyl tile
- Most prepared concrete and timber subfloors
Surface preparation
- Ensure surfaces are dry, smooth, clean and free of dust, oil, paint or contaminants that could limit adhesion.
- Prime highly porous concrete or timber with a suitable primer as directed by the manufacturer.
- Level or repair imperfections with a compatible floor leveller or floor repair compound before bonding.
Application
- Apply an even coat to the subfloor using a 1.6 × 1.6 × 1.6 mm V notched trowel.
- Allow adhesive to become tacky before laying vinyl. Typical tack time is about 10 minutes, longer in cool conditions and shorter in warm conditions. Do not allow a skin to form.
- Lay the vinyl into the adhesive.
- Roll firmly in both directions to ensure full transfer to the back of the vinyl.
Clean up
- Clean tools and spills immediately with warm soapy water.
- Remove dried adhesive with mineral turps.
Conditions and storage
- Apply between 8°C and 35°C with adequate ventilation.
- Shelf life: 12 months in unopened container stored at approximately 20°C.
Good to know
- Use a roller after placement to improve bond and minimise bubbles.
- Coverage varies with subfloor condition, porosity and trowel technique.
Warranty
Product is guaranteed for 10 years when installed in accordance with the manufacturer’s instructions.
